The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] St2000+ connected to CSx76 Garmin
09-27-18, 02:56 PM (This post was last modified: 09-28-18 10:39 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] St2000+ connected to CSx76 Garmin
Has anyone had experience connecting the GPS to the TP?
I tried to connect the NMEA output from GPS to the NMEA input of the autopilot but it doesn’t work.
I set the output of the garmin to NMEA and verified that some signal is present (I don’t know if the code is correct but looks like a digital signal)
The autopilot seems not receiving any information.
The TP manual says that the track mode must be activated pressing the +10 and -10 simultaneously while the gps is following a route to a waypoint, but the TP is not reacting at all.
Anyone has suggestions to sort the problem out?
Am I doing something wrong?

Thx
Salvo
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] St2000+ connected to CSx76 Garmin - Salvo1963 - 09-27-18 02:56 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)