[CA] [CA11] i70s and rudder angle gauge display not available

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum tmarks11,

While the i70/i70S MFIDs are designed to repeat instrument, compass, and rudder data from a marine electronics system, the MFIDs will only calibrate and set alarms for instrument, compass, and rudder transducers which are directly connected to an iTC-5 or instrument pod. In systems featuring an autopilot, compass and rudder reference transducers should be interfaced directly to the autopilot to ensure proper operation of the autopilot. Correspondingly, any calibration of these transducers must be performed via the autopilot's control head.