European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Autopilots 
/
[CA] [CA11] SPX30 resets STng network when switched on
/
[CA] [CA11] SPX30 resets STng network when switched on
|
[CA] [CA11] SPX30 resets STng network when switched on
|
|
10-09-18, 11:31 PM
(This post was last modified: 10-10-18 02:42 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[CA11] SPX30 resets STng network when switched on
I have an SPX30 course computer on a small STng network. Also on the network are an iTC5, Axiom 12, i70s and p70s. The network is powered through a power spur cable connected to the iTC5. If that power is switched on and the instruments allowed to come up, then the SPX30 is switched on, both the i70s and the p70s reset and reboot. This is quite repeatable. Both power connections are to the same 12V bus, on different breakers. The seatalk power switch in the SPX30 is off, I've even pulled the fuse for it as a test.
Is there an incompatibility latent in the SPX30 that causes this? On my other boat with a far more extensive STng network and ST70 instruments, this does not happen. It has only caused a problem one time, when the p70s did not reset cleanly and went dark. The whole system had to be power cycled to get it up again. Nevertheless it does not seem right. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[CA11] SPX30 resets STng network when switched on - jfitch - 10-09-18 11:31 PM
RE: [CA11] SPX30 resets STng network when switched on - Chuck - Raymarine - Moderator - 10-10-18, 02:49 PM
RE: [CA11] SPX30 resets STng network when switched on - jfitch - 10-10-18, 11:23 PM
RE: [CA11] SPX30 resets STng network when switched on - Chuck - Raymarine - Moderator - 10-11-18, 09:43 AM
|
User(s) browsing this thread: 1 Guest(s)