The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Seatalkng integration
10-11-18, 10:28 PM
Post: #1
Seatalkng integration
Hi. Sorry if this is obvious but I'm trying to integrate an rs150 GPS via a seatalk 1 to seatalkng converter, to an st4000plus control head, as well as 2 x rl70c displays with chartplotter functionality (one a repeater of the other, with hsb2 connection between the two).

I know that the seatalk 1 bus needs to have its power disconnected, and receive power through the seatalkng converter. But am I correct that neither the st4000plus, nor the rl70c displays are designed to be powered through the seatalk 1 connections?

So I'm assuming I still have to run three, separate 12v supplies (one to each rl70c, as well as one to the st4000plus), then cut both of the red seatalk connection cables, (one in rl70c-to-st4000plus seatalk cable, and one in st4000plus-to-seatalkng converter cable?

Is this correct?

Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Seatalkng integration - Yourmomm - 10-11-18 10:28 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)