[DG] [DG] Bleed the pump
|
10-12-18, 10:30 AM
(This post was last modified: 10-16-18 03:54 AM by Derek G.)
Post: #1
|
|||
|
|||
[DG] Bleed the pump
I have just completed an EV-150 installation on a boat with twin Mercury Verado and can't get the pump to move any fluid. It seems as though it has an air lock and fluid never reaches the pump. I have confirmed the plumbing with the limited amount if info that I seem to be able to find for a Verado install. The helm works just fine from the wheel. The system is working, you can here the pump cycle, but nothing in the way of motion. I did try cracking one of the tee fittings and running the pump in each direction but still nothing.
What am I missing? |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[DG] Bleed the pump - t_gorski - 10-12-18 10:30 AM
RE: [DG] Bleed the pump - Derek G - 10-16-18, 04:05 AM
|
User(s) browsing this thread: 1 Guest(s)