Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Raymarine Recovery Screen on Axium 9
10-27-18, 03:42 PM (This post was last modified: 10-29-18 08:03 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Raymarine Recovery Screen on Axium 9
OK, I was able to install the upgrade. Thanks for your help with this Chuck. After the upgrade my radar will still not work. The radar worked fine prior to my failed attempt to upgrade the Axiom 9 software. I first had this problem after the failed upgrade attempt. The problem remains even now that the software has been upgraded. The radar powers up and connects to the Axiom (had to reconnect after the software update) but when I hit the transmit button I get a message that the "Scanner failed self test". I reinstalled the radar software but this didn't solve the issue.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Raymarine Recovery Screen on Axium 9 - dbaders - 10-27-18 03:42 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)