The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Lighthouse III on eS 98 together with one Axiom questions
10-27-18, 10:18 AM (This post was last modified: 10-29-18 10:59 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Lighthouse III on eS 98 together with one Axiom questions
I have two es98 MFDs and one ole e7 MFD. I think about exchanging the e7 against an Axiom and updating the es98 to Lighthouse III.

It's a steel boat. The Axiom would be inside, the two es98 MFDs are at the outside helm. A Quantum is connected via Wifi to one of the es98, which is also the data master. All MFDs are networked via Raynet.

After reading FAQs and documentation I have the following questions:

1.) Does the es98 have an equivalent performance in day-to-day operations like zooming a chart, switching between apps, reaction on touch input after updating to Lighthouse III? Or is Lighthouse II notable faster on these MFDs?

2.) I'm aware that it's recommended to make the Axiom MFD the data master and connect that to the SealTalkNG (NMEA2000) network. I can do that. But the Quantum would still need to be connected via Wifi to one of the es98 MFDs since it's Wifi signal would not reach the Axiom MFD (which is inside the steel hull).

Furthermore, a Raymarine CAM200 is connected to the other es98, which I cannot change.

Is this configuration supported so that every MFD has access to everything (es98 using charts from Axiom, Axiom using Quantum and CAM200 connected to es98 MFDs, each es98 MFD Quantum/CAM200 connected to the other es98)?

Thanks!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Lighthouse III on eS 98 together with one Axiom questions - JBuss - 10-27-18 10:18 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)