Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] EV-100 on a powerboat?
02-14-19, 05:37 PM
Post: #5
RE: [CA11] EV-100 on a powerboat?
Thanks for your help, Chuck. It's been a couple months and I'm finally getting back to this project.

I've confirmed with SeaStar, and the cylinder on my boat is indeed 7.2 cu. in.

Before I pull the trigger and potentially buy the wrong system again, could you tell me if the EV-150 will work for my application? 7.2 cu. in. steering cylinder, 34' length, 11,400 dry weight.

Based on the literature I can find, the steering cylinder I have is correct for this autopilot (EV-150), but I'm not sure what "small to medium sized" vessels means. I imagine the EV-200 would give me additional capability, but I'm really just looking for something to hold a course in relatively calm water. If the EV-150 will be adequate, I'd just as soon use that one and save some cash (you know how expensive boats can be).

Thanks again!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] EV-100 on a powerboat? - aequitas1916 - 02-14-19 05:37 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)