Raymarine forum / Raymarine Forums / Multifunction Displays v / Compatibility between DSM300 and new MFDs

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Compatibility between DSM300 and new MFDs
06-06-16, 10:40 AM
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Compatibility between DSM300 and new MFDs
Martin,

If connecting the transducer directly to the MFD's transducer socket, then the transducer would be unplugged from the DSM300. The transducer's plug would then be connected to an E66066 Transducer Adapter Cable. The other end of the Transducer Adapter Cable will be plugged into the MFD's transducer socket.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Compatibility between DSM300 and new MFDs - Chuck - Raymarine - Moderator - 06-06-16 10:40 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication