Raymarine forum / Raymarine Forums / Instruments v / [DG] [DG11] Speed no run with D800/P17 and itc-5

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Speed no run with D800/P17 and itc-5
04-08-19, 10:03 AM (This post was last modified: 04-08-19 10:14 AM by Derek - Raymarine - Moderator.)
Post: #15
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] Speed no run with D800/P17 and itc-5
Hi Francisco,

Thankyou for the system description,

There are two possibilities, first try to access the MDS - multiple data source Selection in the i70s, this will enable you to select the itc-5 as the source of speed data from the DST800 transducer. Even if it is selected, please select it again because this will inform the rest of the network what the correct selection for boat speed is.

if this does not work, please check the connections in the itc-5, make sure the screen/ shield of the DST800 is ONLY connected to the Depth connections and NOT to the speed.

Please see the attachment for further information.

Thanks
Derek


Attached File(s)
.pdf  iTC-5-and-DST-800-Connection-instructions-EN.pdf (Size: 281.96 KB / Downloads: 224)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG11] Speed no run with D800/P17 and itc-5 - Derek - Raymarine - Moderator - 04-08-19 10:03 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication