The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] NMEA 0183 from Axiom

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] NMEA 0183 from Axiom
11-06-18, 01:54 PM (This post was last modified: 11-06-18 02:48 PM by Chuck - Raymarine - Moderator.)
Post: #1
profrobj24 Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2016
Reputation: 0
[CA11] NMEA 0183 from Axiom
I have just upgraded my MDF from an e80 to an Axiom 9. I also installed a AIS 700. All features seem to be working fine and talking to each other at this time. I need to find an output of NEMA 0183 to get GPS data to my iCom IC-M504 VHF to hhave the DSC on the radio work. I see that there are outputs on the AIS700 for this but the manual also says that these leads are intended for diagnostic purposes only. It there a way to come off the Seatalk backbone or the SeatalkHF?

Thannk you
Rob
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] NMEA 0183 from Axiom - profrobj24 - 11-06-18 01:54 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication