The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Ev100 Proper Torque for BSP Adapters to Pump

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Ev100 Proper Torque for BSP Adapters to Pump
11-13-18, 08:52 AM (This post was last modified: 11-13-18 09:59 AM by Chuck - Raymarine - Moderator.)
Post: #1
bwconquest21 Offline
Junior Member
**
 		Posts: 11
Joined: Aug 2016
Reputation: 0
[CA11] Ev100 Proper Torque for BSP Adapters to Pump
I have a simple questions . . . what is the proper torque or “feel” for the BSP to NPT adapters fitted to the hydraulic pump since, tape and compound are prohibited? What’s “tight” enough for the BSP adapters? Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Ev100 Proper Torque for BSP Adapters to Pump - bwconquest21 - 11-13-18 08:52 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication