[CA] [CA11] eS128 running LH3 barometric/fishing maps stutters

[Pkjv]

I am running LH3 v3.70.7 with a Navionics 960+ card on the eS128.

All seems fine, except for when activating the barometric/fishing detailed maps. It takes 2-3+ minutes to load the chart and often times only portions of the chart load. I do have a lot of sonar chart live tracks that were created on an older e125 Series (prior to the eS128) on this same Navionics card that I am now using for the eS128 and it also have a good amount of lsd-cache on it.

I used to run LH2 on the e125 with a side by side barometric and detailed Navionics+ without performance issues (map load probably took 10-20seconds).

Before trying things out with all user data removed from the Navionics card (again: I have quite a bit of sonarchart-live data on the card), I wonder if there is a known issue running barometric/fishing charts with LH3 on the eS128.