MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[CA11] eS97 and AIS target tracking


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] eS97 and AIS target tracking
11-15-18, 06:17 PM (This post was last modified: 11-16-18 10:18 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] eS97 and AIS target tracking
The sailboat has the eS97 with Lighthouse 2 software installed. The boat also has an AIS receiver connected to the NMEA2000/Seatalkng
buss. I would like to understand if you can selectively remove one of the AIS targets so that it does not cause an alarm condition if this target is following you. This target is a friends boat that is traveling as part of a group going south. All other target should stay active and cause alarms when you are on watch at night. The crew is sleeping and these alarms from the boats that are in the traveling group cause them to wake up.

Thanks
George
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] eS97 and AIS target tracking - george123 - 11-15-18 06:17 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)