The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.3.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Evolution 100 and Remote S100, tack problem in wind mode
12-07-18, 04:55 AM (This post was last modified: 12-07-18 11:33 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Evolution 100 and Remote S100, tack problem in wind mode
I have an Evolution 100 autopilot with the remote controller S100. My S100 base unit with SeaTalk is connected to SeaTalk NG via the SeaTalk NG converter (sw 2.03).
P70s sw 3.07, ACU 100 sw 2.23, EV1 sw 2.18

When I sail in wind mode and make a tack using my P70s everything works fine. But when I give a tack command from my remote control unit the autopilot switches itself from Wind mode to Auto Mode.

I have the latest available sw in my autopilot components, and to me it seems to be the SeaTalk NG converter that causes the problem that the autopilot come back to auto mode when I tack from S100. Have you identified the same problem? If so do you plan to correct the sw before next sailing season?
Find all posts by this user
Thread Closed 


Messages In This Thread
[LW11] Evolution 100 and Remote S100, tack problem in wind mode - Stefan - 12-07-18 04:55 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)