MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[CA11] Axiom 7 STng to ST1 integration


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom 7 STng to ST1 integration
12-16-18, 10:37 AM (This post was last modified: 12-17-18 11:33 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom 7 STng to ST1 integration
Hello

You have helped me many times in the past. A friend of mine is piecing together a Old / New Raymarine System with an Axiom 7 and a A98 to a Sport Pilot. I've attached a diagram. Can I get away without powering the STng network? If not, can I just use a T connector and add power there with a Backbone to the converter? My friend is on a tight budget and is trying to spend as little as possible.

Please let me know

Thanks

Eric


Attached File(s)
.pdf  Raymarine Network Layout Shane Rev 2.pdf (Size: 149.6 KB / Downloads: 103)

1999 Sea Ray 370 Express Cruiser Hardtop
Twin 454 Horizons, ZF Hurth Transmissions,
Axiom Pro 12
Axiom 12
Quantum II Radar
Real Vision 3D
1kW CHIRP sonar
B275 Transducer
Ray 60 VHF
ACU 150 Autopilot
P70R
Smart Remote

https://photos.app.goo.gl/UKDm91zlSwlPhCQ12
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom 7 STng to ST1 integration - West32 - 12-16-18 10:37 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)