MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[LW11] Axiom 9 defaults to Statute Miles.

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW11] Axiom 9 defaults to Statute Miles.
01-06-19, 11:38 PM (This post was last modified: 01-07-19 06:28 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Axiom 9 defaults to Statute Miles.
I upgraded from the E7 Hybrid to the Axiom 9 approx 6 months ago. If I turn on the single switch for the other instruments (ST50 Wind/speed/depth/autopilot and ST60 Tri-data) first, then the Axiom will revert to Statute miles. This also occurs occasionally at random, which I put down to power glitch/spikes. If I attempt to select NM with the other instruments still powered, it jumps straight back to statute miles. If however I switch the other instruments off, I can then select Nm, which is retained when the other instruments are switched on.

My workaround is to switch on the Axiom a full minute before the other instruments, but this is obviously a pain.

Any thoughts on a cause, and a fix.

Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[LW11] Axiom 9 defaults to Statute Miles. - Adventurous - 01-06-19 11:38 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)