MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[CA11] Networking an a165 and gs165 MFD


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Networking an a165 and gs165 MFD
01-08-19, 04:07 PM (This post was last modified: 01-08-19 04:10 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Networking an a165 and gs165 MFD
Hi all,

I have 2 chart plotters an a125 and a gs165. I want to be able to read Navionics charts for the same region on both, my understanding is that I only need one subscription with charts loaded on the SD card and both MFDs linked using a raynet to raynet cable. Is this correct?

Further to this, I seem to be having the issue with the charts display whereby the area I am in appears as a white missing puzzle. I want to perform a software update but I am aware that updating one ( i think the gs165 ?) to lighthouse 3 will make it incompatible with the a125 ( which doesn't support lighthouse 3?). Should I therefore be looking to update both to: v19.03 ?

Many thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Networking an a165 and gs165 MFD - Rom - 01-08-19 04:07 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)