The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] Bridging AIS650 to e120-widescreen

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Bridging AIS650 to e120-widescreen
01-16-19, 10:05 AM (This post was last modified: 01-16-19 04:45 PM by Chuck - Raymarine - Moderator.)
Post: #1
Rom Offline
Junior Member
**
 		Posts: 36
Joined: Nov 2018
Reputation: 0
[CA11] Bridging AIS650 to e120-widescreen
Hi All,

We are having an issue with the mentioned link. The AIS unit functions correctly but it isn't speaking to the e120 via the SeaTalkng/NMEA 2000 network. We have thought about speaking linking them VIA nmea 0183 but this is quite difficult due to the cable configuration. Is there anything that we are missing?

On another note, we are not able to carry out the software updates on the e120 widescreen. As instructed, the software is downloaded from the website and placed on the root of the SD card. The unit is rebooted but nothing happens. Again, anyone have any ideas?

Many thanks,
Rom
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Bridging AIS650 to e120-widescreen - Rom - 01-16-19 10:05 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication