Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [[CA11] Axiom MFD with Camino-108 AIS

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [[CA11] Axiom MFD with Camino-108 AIS
02-03-19, 02:47 AM
Post: #11
Tenedos Offline
Junior Member
**
 		Posts: 8
Joined: Jan 2019
Reputation: 0
RE: [[CA11] Axiom MFD with Camino-108 AIS
Hi Chuck,

I think I found the culprit. Problem happens when I disable the internal GPS.

Here is the thing, reception of the internal GPS in the marina has not been very good and it had been missing GPS fixes quite a lot (causing alarms). So I disabled it in order to use the GPS location coming from the AIS. Clearly the problem happens when I do this. If I enable the internal GPS, "flashing of AIS targets" stops, if I disable it again, it starts. In both cases I do have a GPS fix.

Why this happens is puzzling though. Any insight?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [[CA11] Axiom MFD with Camino-108 AIS - Tenedos - 02-03-19 02:47 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication