The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Running Diagnostics
01-26-19, 11:26 AM (This post was last modified: 01-28-19 08:31 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] Running Diagnostics
Hi All - new member here.

I have an 18" digital radome scanner connected to an e7 MFD.

I recently had the standing rigging replaced, and of course the mast was removed, laid horizontally on supports for a couple of weeks and then stepped.

While the mast was on the hard, I replaced most of the wiring with the exception of the power & coax for the Radome.

Now when I power up the radar it slowly displays lines - like spokes on a bicycle wheel.

I've read threads where you can navigate a menu to run diagnostics for the scanner - and the thread refers to "soft keys" at the bottom of the screen. When I navigate to "scanners" - I do NOT see soft keys on the screen.. am I missing something?

Thanks in advance for the help.

Tim
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] Running Diagnostics - gs12tim - 01-26-19 11:26 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)