The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] DSM300 working fine with Axiom?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] DSM300 working fine with Axiom?
01-31-19, 08:57 AM (This post was last modified: 01-31-19 09:22 AM by Chuck - Raymarine - Moderator.)
Post: #1
dtfeld Offline
Member
***
 		Posts: 53
Joined: Jan 2018
Reputation: 0
[CA11] DSM300 working fine with Axiom?
I have and legacy fishfinder consisting of a B60 connected to a DSM 300, that is in turn, networked via Raynet to an Axiom 12 RV. I have read that the DSM300 will not work with the Axiom, but it seems to operate just fine (about the same as when it was connected to an a128).

I have also read that I can connect the B60 directly to the axiom with an adaptor cable (and I may consider doing this), but again, everything seems to operate as expected.

Am I missing something? Will connecting the B60 directly to the axiom give better results or added features?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] DSM300 working fine with Axiom? - dtfeld - 01-31-19 08:57 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication