[CA] [CA11] RS150 GPS Transducer

[Chuck - Raymarine - Moderator]

Satco,

Unfortunately, the A60/A65 products were retired quite some time ago. Parts and service are no longer available for these products. Should an A60/A65 Chartplotter or A60/A65 Chartplotter/Fishfinder's original GPS sensor have failed, then it would be recommended that it be replaced with a TackTick T908 GPS Sensor. This GPS sensor must be connected to a switched 12VDC power circuit and spliced the MFD NMEA 0183 Cable which was included within the package of each A60/A65 (NOTE: these cables are no longer available). The following connections would be made:
- TackTick power (red) lead to switched +12VDC circuit
- TackTick ground (screen) lead to -12VDC to the MFD NMEA 0183 Cable's NMEA Input- (green) lead and its NMEA 0183 Output- (brown) lead
- TackTick NMEA 0183 Output+ (green) lead to MFD NMEA 0183 Cable NMEA 0183 Input+ (white) lead
- TackTick NMEA 0183 Input+ (brown) lead to MFD NMEA 0183 Cable NMEA 0183 Input+ (yellow) lead