Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Raymic and Ray55
02-13-19, 03:42 PM (This post was last modified: 02-13-19 04:38 PM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] Raymic and Ray55
I am using the Raymic A46051 kit which included the cable with the bulkhead mount at one end and a connector for the Ray 55 base at the other end. The connection of the mic to the bulkhead jack looks good. The connection of the of the cable to the Ray 55 base pigtail looks good except the threads on the shells do not seem to match. The R55 still works and all the controls on the mic work good. The screen on the mic looks good and responds correctly. The only thing that does not appear to work is the sound coming from the mic. From my old, old days as a Navy ET, I would guess the speaker in the mic is bad, one wire in the cable got knicked, or one connector pin is bad.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Raymic and Ray55 - JT101 - 02-05-19, 12:28 PM
RE: [CA11] Raymic and Ray55 - JT101 - 02-06-19, 05:33 PM
RE: [CA11] Raymic and Ray55 - JT101 - 02-13-19 03:42 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)