Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] es128/i70 display/st60plus wind and speed displays
04-18-19, 03:18 PM (This post was last modified: 04-18-19 03:25 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [TG11] es128/i70 display/st60plus wind and speed displays
Item 1. I have been able to correct wind speed
Item 2. Still working on
Item 3. Noted
Item 4. I only have Raymarine instruments. I disconnected the i70 display and I can now set the es128 displays to nautical miles. The problem is the i70 preventing both the es128 and the i70 from being able the set for nautical miles and for Australia nm-m. The only reason I purchased a i70 mfd was that it is able to log barometric pressure (Only need a remote display of depth to match existing i60 plus instruments) which, considering the cost of the es128, the es128 cannot. Please advise a) Update to i70 instrument to correct overwriting issue on es128 and i70 instrument b) Advise if there is a software revision to allow logging of barometric pressure on the es128 c) I can live with a depth display to replace i70 if there is no fix but what do I do with the i70 display - can Raymarine refund or exchange with a suitable depth display?


John Rogers
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: [TG11] es128/i70 display/st60plus wind and speed displays - - 04-18-19 03:18 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)