The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] Transducers - bronze or plastic?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Transducers - bronze or plastic?
02-14-19, 02:06 PM (This post was last modified: 02-15-19 11:07 AM by Chuck - Raymarine - Moderator.)
Post: #1
jharcnc Offline
Junior Member
**
 		Posts: 2
Joined: Apr 2018
Reputation: 0
[CA11] Transducers - bronze or plastic?
I upgraded to 2x Axiom 7's (RV) last year on my 210 Whaler Outrage (20 degree deadrise). The RV-100 mounted off the transom (port side) loses depth at speed but bigger issue is it kicks up a lot of spray on plane.

I know if I moved it the starboard side it would probably be more stable holding the bottom but the spray issue will remain.

Therefore I'm considering going with either the RV-220 bronze pack or RV-320 plastic pack. I have no flat areas on my hull so my understanding is I need the pair/pack. Which would you recommend?

I also see a new product - RV-420 in stainless. What can you tell me about that?

Help me decide please? I boat on Georgian Bay in Canada where max depth offshore is only up to about 300-400ft MAX.

Cheers
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Transducers - bronze or plastic? - jharcnc - 02-14-19 02:06 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication