Raymarine forum / Raymarine Forums / Product Selection Assistance v / [TG] [TG11] AXIOM 9 TRANSDUCER SELECTION

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] AXIOM 9 TRANSDUCER SELECTION
05-13-19, 12:27 AM
Post: #6
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] AXIOM 9 TRANSDUCER SELECTION
Hello Mark,

You'd use either RV100 (transom-mount) or RV220 (through-hull tilted-element split pair), not both. The RV100 and RV220 produce the same results, they're just different mounting styles (http://www.raymarine.com.au/transducers/realvision/). I'm sure you know this, just wanted to be sure since you said 'and' rather than 'or' before.

Either can plug into the back of an Axiom 9 RV or Axiom 9 Pro RVX (emphasising because not all Axiom/Axiom Pro variants can connect to these transducers, you need a model with RV in the model name.)

You don't need a CP470 for any RV transducer: you only need a CP470 when using a high-power Airmar Chirp transducer.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] AXIOM 9 TRANSDUCER SELECTION - Tom - Raymarine - Moderator - 05-13-19 12:27 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication