Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] N2K PGN 127508 to LH3 network (Axiom Pro, GS165)
03-13-19, 01:23 PM
Post: #2
RE: [CA11] N2K PGN 127508 to LH3 network (Axiom Pro, GS165)
Welcome to the Raymarine Forum Pete,

LH3 software is indeed designed to report battery voltage based on PGN 12750. This data is displayed in the Battery Voltage, Battery Current, and Battery Temp. data items. In such situations, a NMEA 2000 analyzer (ex. Actisense NGT-1 w/PC running NMEA Reader software, etc.) would be interfaced as a spur to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone. If such an analyzer was interfaced to the system, I suspect that you would find that the Instance ID(s) are either not consistent with the FAQ found here, or that PGN 127508 is not present or not being populated.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] N2K PGN 127508 to LH3 network (Axiom Pro, GS165) - Chuck - Raymarine - Moderator - 03-13-19 01:23 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)