[CA] [CA11] Help updating SR100 software
|
04-01-19, 07:57 PM
(This post was last modified: 04-02-19 08:45 AM by Chuck - Raymarine - Moderator.)
Post: #7
|
|||
|
|||
RE: [CA11] Help updating SR100 software
I have a SR100 with the new software. I bought a new cable. And I bought a new stereo. Still no audio. So, I'm thinking either the cable that I received is defective, or the audio output of the SR100 module isn't actually outputting audio.
So I have a second module that I have that I could not get the new software to load. So I would like to send it in to get the software updated. Do you have a schematic of the cable so I can test continuity between the 4 pin black cable on the SR100 to the RCA phono jacks? Thanks |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Help updating SR100 software - tmitchell5188 - 03-19-19, 05:29 PM
RE: [CA11] Help updating SR100 software - Chuck - Raymarine - Moderator - 03-20-19, 08:52 AM
RE: [CA11] Help updating SR100 software - tmitchell5188 - 03-22-19, 08:08 PM
RE: [CA11] Help updating SR100 software - Chuck - Raymarine - Moderator - 03-25-19, 10:04 AM
RE: [CA11] Help updating SR100 software - tmitchell5188 - 03-26-19, 07:09 PM
RE: [CA11] Help updating SR100 software - Chuck - Raymarine - Moderator - 03-27-19, 07:59 AM
RE: [CA11] Help updating SR100 software - tmitchell5188 - 04-01-19 07:57 PM
RE: [CA11] Help updating SR100 software - Chuck - Raymarine - Moderator - 04-02-19, 08:49 AM
|
User(s) browsing this thread: 1 Guest(s)