Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] Screen dimming reset, Axiom 9
03-26-19, 08:47 PM
Post: #2
RE: [TG11] Screen dimming reset, Axiom 9
Hello Andrew,

Thanks for the feedback. On my bench test Axiom the backlight does indeed revert to 100% brightness after powering off and back on, either via the power control or just pulling out the power cable. Are you running the latest (v3.8.105, at the time of writing) software on your Axiom?

Something it sounds like you're not aware of is that there's also a shortcut for exactly the sort of circumstance you describe: if you keep swiping the power control right whilst the display is powered but on low backlight level, the backlight will increase by 10% on each swipe, meaning you don't need to be able to see the screen to bring the backlight back up.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Screen dimming reset, Axiom 9 - Tom - Raymarine - Moderator - 03-26-19 08:47 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)