The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] External GPS to legacy e-series e80
03-21-19, 01:07 PM (This post was last modified: 03-21-19 02:10 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] External GPS to legacy e-series e80
Hi all,

An external GPS is failing on an e80 MFD. The GPS is currently spliced then sent to the Seatalk/Alarm input. The gps antenna currently installed is no longer available, question is what are my options here?

I'm assuming these are valid?
1.) any gps which outputs sentences in NMEA2000 and plug into the display's seatalk2 plug (which i am assuming is a standard NMEA2000 (devicenet) plug ?)

2.) any gps which outputs in NMEA0183 and splice to the R08004 cable (no longer available I believe)

3.) Any gps antenna again with NMEA0183 and splice to E55054 which goes into the unit's seatalk/alarm plug

could I use the RS150 GPS Sensor from Raymarine and retrofit it somehow to go into the seatalk2 plug at the back?

Thanks,
Rom
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] External GPS to legacy e-series e80 - Rom - 03-21-19 01:07 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)