Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] RNS 6.1 - Windows 7 Display Issue/Crashing - E120
04-08-19, 09:20 AM
Post: #4
RE: [CA11] RNS 6.1 - Windows 7 Display Issue/Crashing - E120
Sam,

Q. Could there be a display driver, aspect ratio change or video card issue that could cause problems in RNS?
A. Negative. Unlike monitors, PCs running RayTech software communicate via Ethernet communications with the RayTech software. Most such crashes when viewing Navionics cartography are related to either an incompatibility with the chart card(s) being used or with the graphics/graphics driver of the PC. In the case of the latter, it would be recommended that hardware acceleration be configured OFF (FILE->SETUP->PERFORMANCE->USE MICROSOFT OPENGL) and that the system be tested with the RayTech software so configured.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] RNS 6.1 - Windows 7 Display Issue/Crashing - E120 - Chuck - Raymarine - Moderator - 04-08-19 09:20 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)