Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Routing Limitations on E90W
03-28-19, 03:07 PM (This post was last modified: 03-28-19 03:08 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Routing Limitations on E90W
Welcome back to the Raymarine Forum Viben,

The requested information is found within Chapter 5.4 Waypoints, routes and tracks storage capacity of the E-Series Widescreen MFD Reference Manual.

Q1. Maximum number of waypoints per route?
A1. 50

Q2. Maximum number of waypoints to be stored on the plotter?
A2. 3000 waypoints; 100 groups

Q3. Maximum number of routes to be stored on the plotter?
A3. 150

Q4. Maximum number of waypoints per track?
A4. Maximum number of track points per track = 1000; maximum total number of track points within the system is 10,000

Q5. Maximum number of tracks to be stored on the plotter?
A5. 15 tracks

Q6. Any other limitations to be aware of?
A6. The following additional constraints should be heeded with this product
- Waypoint/Route'/Track Name Length: 16 characters (DO NOT USE APOSTROPHE (') OR DOUBLE QUOTE (") CHARACTERS);
- Duplication of waypoint, route, or track names prohibited
- Waypoint comments: 32 characters (DO NOT USE APOSTROPHE (') OR DOUBLE QUOTE (") CHARACTERS)
- Routes: routes must not use the same waypoint for consecutive points within the route
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Routing Limitations on E90W - Chuck - Raymarine - Moderator - 03-28-19 03:07 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)