Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Yamaha to Raymarine MFD
04-02-19, 02:02 PM
Post: #2
RE: [CA11] Yamaha to Raymarine MFD
Welcome to the Raymarine Forum Hoehn000,

Q. can I go from Yamaha command link cable, to Raymarine E70242 cable, to ECI-100 or do I have to also install a full Yamaha Hub?
A. Negative. Like products having a SeaTalkng / NMEA 2000 communications interface, Yamaha engines, Command Link+ gauges, Command Link Plus controls, Command Link plus displays, and engine gateways, these items are each designed to be interfaced as individual spurs to a powered and properly terminated CAN bus. The engine gateway, in this case the ECI-100, will be interfaced as a spur to the engine CAN bus (Yamaha Hub ... supplied with proper termination and power) and as a spur to the marine electronics powered and properly terminated SeaTalkng / NMEA 2000 backbone.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Yamaha to Raymarine MFD - Chuck - Raymarine - Moderator - 04-02-19 02:02 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)