MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[CA11] RS150 => ST1/E120Classic MFD

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] RS150 => ST1/E120Classic MFD
04-04-19, 12:50 PM (This post was last modified: 04-08-19 01:32 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] RS150 => ST1/E120Classic MFD
The post here: indicates that any RS130/150 should be directly connected to the ST2 port of a E120 Classic, so:

Q1: If the ST2 port on the E120 Classic is occupied by a ST2 Keyboard, can the A06061 adapter cable be inserted into a ST2 block (that shares the ST2 keyboard) with the block connected to the MFD?

Q2: The E22158 user manual (see attached) has a schematic indicating connection of a "SeaTalkng GPS Receiver" (presumed to be a RS150) with the E22158 connecting directly into a ST1 block without the need for the E22158 to be powered.

Is this not correct?


Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[CA11] RS150 => ST1/E120Classic MFD - JPenny1961 - 04-04-19 12:50 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)