The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] DST800 to iTC-5

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] DST800 to iTC-5
04-09-19, 06:53 PM (This post was last modified: 04-10-19 02:33 PM by Chuck - Raymarine - Moderator.)
Post: #1
jmur2808 Offline
Junior Member
**
 		Posts: 5
Joined: Mar 2019
Reputation: 0
[CA11] DST800 to iTC-5
I have an Airmar DST800 with Speed and Temp connected to an iTC-5. Temp is connected OK although the Speed is not connected (green led flashing)
I have tested the Speed via the Green wire and Shield and the circuit opened and closed the required 4 times in a complete turn of the paddle wheel. Would this indicate that the iTC-5 is faulty. It is still covered by warranty.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] DST800 to iTC-5 - jmur2808 - 04-09-19 06:53 PM
RE: [CA11] DST800 to iTC-5 - jmur2808 - 06-01-19, 11:54 PM
RE: [CA11] DST800 to iTC-5 - jmur2808 - 07-05-19, 07:00 PM
RE: [CA11] DST800 to iTC-5 - jmur2808 - 08-18-19, 06:52 PM
RE: [CA11] DST800 to iTC-5 - jmur2808 - 11-03-19, 01:43 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication