The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / i70

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
i70
05-10-16, 08:02 AM
Post: #1
rsdigennaro Offline
Junior Member
**
 		Posts: 2
Joined: Feb 2016
Reputation: 0
i70
I have a seatalkng network with 2 - i70 and 1 - ST70+ displays.
In calibration mode, I can see the windspeed from the wind pod, but it doesn't show on the i70 or ST70+ screen in display mode (reads 0.0 kts). The wind direction also goes counterclockwise when I turn clockwise. Which display should I run setup/calibration from if it matters. The depth and speed don't show either. All 3 pods are found by the network.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
i70 - rsdigennaro - 05-10-16 08:02 AM
RE: i70 - Steve - Raymarine - Moderator - 05-10-16, 09:49 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication