Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Updating Multifunction Display
04-23-19, 10:47 AM (This post was last modified: 04-23-19 10:47 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Updating Multifunction Display
Welcome to the Raymarine Forum Northernsailor,

Assuming that the information which you have provided is correct it appears that your dealer may not have been correct in his responses to you or that you may have misunderstood the dealer's response. Please click here to view a recently answered thread addressing the last known availability status of Navionics cartography on CF memory cards. Per the referenced thread, it would be recommended that Radar Marine, West Marine, and/or that Navionics be contacted to purchase one of these chart cards.

Should you desire to upgrade to one of Raymarine's Axiom/Axiom Pro/Axiom XL MFDs, then it should be noted that any radome or open array pedestal which was designed for use with a C-Series Widescreen MFD (C90W, C120W, C140W), may be used with an Axiom/Axiom Pro/Axiom XL MFD. Similarly, any instruments or Raymarine instruments or autopilots which had been interfaced to a C-Series Widescreen MFD may be either interfaced to or adapted to be interfaced to an Axiom/Axiom Pro/Axiom XL MFD.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: [CA11] Updating Multifunction Display - Chuck - Raymarine - Moderator - 04-23-19 10:47 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)