Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrading to Axioms from C80
06-03-19, 10:01 AM
Post: #4
RE: [CA11] Upgrading to Axioms from C80
Mark,

The following corrections/changes are recommended:

Ethernet:
- The diagram correctly shows that the MFDs and radome will be interfaced to the HS5 RayNet Network Switch. No T should be shown within the system's Ethernet cables.

SeaTalkng/NMEA 2000:
- The diagram appears to have incorrectly indicated how the backbone featuring the stereo and VHF radio will be interfaced to the marine electronics backbone to which the MFD has been interfaced. The spur cable shown to connect these backbones to one another should be deleted accordingly. Please click here to view a FAQ addressing how two SeaTalkng/NMEA 2000 backbones may be interfaced to one another.

- The diagram appears to have incorrectly indicated that a T will be inserted into the Axiom 7 DV MFD's Ethernet cable. This is not so. The MFD's NMEA 2000 interface will be connected to a spur socket within the marine electronics NMEA 2000 backbone.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Upgrading to Axioms from C80 - Chuck - Raymarine - Moderator - 06-03-19 10:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)