Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Ev1 sensor core Cable
04-24-19, 02:58 PM
Post: #2
RE: [CA11] Ev1 sensor core Cable
Welcome to the Raymarine Forum Hotdog7,

The EV-1 CCU is designed to be interfaced to the system via its SeaTalkng / NMEA 2000 socket. This socket is designed to accept a SeaTalkng Spur Cable. SeaTalkng Spur Cables are black with a white stripe and feature a white plug (typically on each end) to permit one end of the cable to be plugged into the device and the other end of the cable to be plugged into a spur socket of a T-Piece, 5-Way Connector, SeaTalkng Inline Terminator, or iTC-5 within the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[CA11] Ev1 sensor core Cable - Hotdog7 - 04-22-19, 07:25 PM
RE: [CA11] Ev1 sensor core Cable - Chuck - Raymarine - Moderator - 04-24-19 02:58 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)