[CA] [CA11] Speed Transducer Wire Colours

[rmcmeekin]

I recently replaced my ST-60 suite of instruments with new I-70's. To do this I bought a ITC5 to do the analogue to digital conversion.

My problem is the wiring colours for the speed transducer.

My connectors coming from the transducer are red, brown, green, purple and yellow (see photo)

The pins on the itc-5 are red, grey, green, white and brown (see photo)

The original manual for my old ST-60 is different again:
Brown, white, screen (?), green and red. (see photo)

The depth and wind connections seemed to match colour for colour.

Any suggestions as to how to connect this transducer to the ITC5 greatly appreciated.

Thx
Randy