The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Seatalk NG Elbow connections
04-24-19, 12:14 PM (This post was last modified: 04-26-19 02:45 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Seatalk NG Elbow connections
I have two instruments, an i70 display, and a P70s control head, mounted in a location that is not deep enough for the standard STNG connector plug to be used. I bought an A06042 400mm STNG elbow cable and tried it, but it isn't long enough to reach the 5 way connector where I want to locate it, but close enough that I can squeeze things and make it work. I then saw that A06077 STNG right angle adapters exist, so I got one. It turns out that the sense of these two right angle devices is completely different - the spur cable points down from the connection to the instrument (the keyway in the plug points toward the crotch of the elbow), and the right angle adapter points up (away from the crotch of the elbow). Is there a standard for these elbow connections? Or is there one that points one way, and another the other way? It didn't occur to me that I had to worry about that issue.

Thanks.

Mark
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Seatalk NG Elbow connections - mprestero - 04-24-19 12:14 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)