The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [LW] [LW11] Seatalk1 to Seatalkng and Axiom 7, I70s MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Seatalk1 to Seatalkng and Axiom 7, I70s MFD
04-24-19, 01:56 PM (This post was last modified: 04-25-19 07:29 AM by Louise - Raymarine - Moderator.)
Post: #1
Rob Vink Offline
Junior Member
**
 		Posts: 5
Joined: Mar 2019
Reputation: 0
[LW11] Seatalk1 to Seatalkng and Axiom 7, I70s MFD
Previous setup:
ST60+ and ST50 instruments connected with SPX5 Course computer.
i70s MFD connected to SPX 5 with A06047 Seatalk1 to Seatalkng converter cable.
This works fine.

New situation:
Same equipment but Axiom 7 added.
Seatalkng backbone with E22158 converter kit.
Axiom 7 and i70s MFD connected via backbone.

I used the A06047 cable to connect to the SPX5 (red lead not connected).

Axiom 7 works and also displays Seatalk1 data.
Power spur cable connected to battery. Led indicator E22158 shows both seatalkng and seatalk1 are healthy.

i70s does not power up.

Q: Could the A06047 cable be the problem and should I use the converter cable supplied with the E22158 kit and connect this cable to the SPX5? Or is something else causing the problem with the i70s?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] Seatalk1 to Seatalkng and Axiom 7, I70s MFD - Rob Vink - 04-24-19 01:56 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication