Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Hard Wire Axiom Pro, to TV. Proper SD Card
04-26-19, 03:51 PM
Post: #2
RE: [CA11] Hard Wire Axiom Pro, to TV. Proper SD Card
Welcome to the Raymarine Forum Fish On,

Unlike the Axiom XL 16, the Axiom Pro MFDs do not feature a video output port. Additionally, no device supporting communications between the MFD and the TV need be interfaced to the MFD. The MFD is designed to communicate via Miracast wireless communications with a Miracast dongle which will be connected to the TV's HDMI port. As communications is between individual MFDs and a Miracast dongle, it should be possible for the image from more than one MFD to be repeated on the vessel's TVs. This feature is discussed in detail within Chapter 5.12 Connecting to a wireless display of the LightHouse 3.9 Advanced Operation Instructions.

Questions 3 and 4 are addressed in detail within Chapter 4.7 Memory card compatibility of the LightHouse 3.9 Advanced Operation Instructions.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Hard Wire Axiom Pro, to TV. Proper SD Card - Chuck - Raymarine - Moderator - 04-26-19 03:51 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)