Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Connecting to wifi
05-23-19, 08:19 AM
Post: #4
RE: [CA11] Connecting to wifi
Mooseboat,

Q1. If I change the wifi channel on the master MFD Axiom do I need to change the Wi-Fi channels on all of my Raymarine electronics?
A1. Negative. Only one device will communicate via Wi-Fi with a Quantum/Quantum 2 radome. The system's MFDs will communicate via wired Ethernet communications and will access the Quantum/Quantum 2 radome via the MFD which as been paired Quantum/Quantum 2 radome. With the exception of the items listed below, all communications within a Raymarine system will occur through wired communications networks. Wi-Fi communications is limited to the following features will only affect the MFD through which such Wi-Fi communications will occur:
- communications between Quantum/Quantum 2 radome and the MFD which it has been paired with
- communications between a mobile device running one of Raymarine's Mobile Apps and the MFD which the mobile device has been connected to via Wi-Fi communications
- communications between a mobile device running the Navionics Boating app and the MFD which the mobile device has been connected to via Wi-Fi communications
- communications between a Wi-Fi access point and a MFD which will be searching for product software updates (typically this will be performed via the system's Data Master MFD
- communications between a Wi-Fi access point and a MFD which will be using the Apps feature (ex. Spotify, Netflix, etc.)

A2. second MFD Axiom, Auto pilot?
A2. Negative and negative ... see the response to Q1.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Connecting to wifi - Mooseboat - 04-29-19, 09:28 PM
RE: [CA11] Connecting to wifi - Chuck - Raymarine - Moderator - 05-23-19 08:19 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)