Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Connecting Yamaha to axiom 9
05-06-19, 04:50 PM
Post: #2
RE: [CA11] Connecting Yamaha to axiom 9
Welcome to the Raymarine Forum Gnj5,

Please click here to view a FAQ addressing this subject. More information concerning how Raymarine's ECI-100 may be used to interface Yamaha engines to a Raymarine system may be found the Yamaha tab of the ECI-100 Engine Gateway Compatibility tab.

With the introduction of LightHouse 3 v3.9.46, Raymarine added a second means of interfacing Yamaha engines to Raymarine systems featuring MFDs running LightHouse 3 v3.9.46. The Yamaha app features are enabled (unlocked) when the following requirements are met:
• A compatible Yamaha Command Link or Command Link Pro network is connected to the MFD via a Yamaha NMEA 2000 gateway (6YG-8A2D0-00-00) or CL7 Gauge.
• Your MFD must be running LightHouse 3 version 3.9 or above

Details of this second method may be found within Chapter 13: Yamaha app of the LightHouse 3.9 Advanced Operation Instructions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Connecting Yamaha to axiom 9 - Chuck - Raymarine - Moderator - 05-06-19 04:50 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)