The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Display Generator Data
05-14-16, 03:19 PM (This post was last modified: 05-16-16 02:50 PM by Chuck - Raymarine - Moderator.)
Post: #1
Display Generator Data
I have a e127 and a Onan generator broadcasting its engine data over the SeaTalk/NMEA2k network via a maretron J1939/N2k converter. I confirmed using N2kView that the generator is broadcasting its data and is utilizing engine instance "2". the port + starboard engines are instance 0/1 respectively. My third party display is able to see this generator data as "Engine 3", however none of the Raymarine displays are able detect the engine data. I setup the raymarine display for 3 engines and ran through Engine setup and it only detects the volvo engines (port/starboard) and not the generator engine data.

One thing to note, the generator does not broadcast its RPM but has all other engine data (hours, temp, oil pressure, voltage).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Display Generator Data - jeokeefe@gmail.com - 05-14-16 03:19 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)