The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG11] Autopilot disengaging - S1G with ST6002 control head

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Autopilot disengaging - S1G with ST6002 control head
05-10-19, 01:50 PM (This post was last modified: 05-10-19 01:57 PM by Chuck - Raymarine - Moderator.)
Post: #1
umuk Offline
Junior Member
**
 		Posts: 2
Joined: May 2019
Reputation: 0
[DG11] Autopilot disengaging - S1G with ST6002 control head
We recently got a problem with our Autopilot (S1G with ST6002 control head driving a Lewmar Integra Drive Unit) disengaging silently from Auto to Standby.
No alarm raised, no beep, no message - just goes to Standby.
Autopilot can be immediately reengaged and then runs hours (or days) at end.

There is no pattern how long after power on or running in Auto this happens. Also no relation to load caused by sea state or wind strength.
We crossed the Atlantic with it 5 months ago and it sometimes kept going for 3-4 days without disengaging sometimes just a few hours. Issue still persists with now only shorter daysailing trips.

Any ideas ?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] Autopilot disengaging - S1G with ST6002 control head - umuk - 05-10-19 01:50 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication