Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom and Transducer Y Cables
05-21-19, 11:41 AM (This post was last modified: 05-21-19 11:45 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Axiom and Transducer Y Cables
Welcome back to the Raymarine Forum mannery,

The A80491 Y-Cable and A80492 Y-Cable are designed to permit an Axiom RV MFD to be simultaneously interfaced to a RV transducer / RV transducer pair and to a 50kHz/200kHz fishfinder transducer. The A80491 Y-Cable is designed for use with 600W fishfinder transducers which had been designed to be directly mated (i.e. no adapter cable) to the transducer socket of any of the following fishfinding products:
- ax7/cx7/e7D/ex7/eSx7 MFD; where x indicates screen size
- A50D/A57D/A70D MFD
- DSM25 fishfinder sounder module
- DS400X/DS500X/DS600X fishfinder
To view the compatible transducers, click here ... note the product ID listed for each transducer.

The A80492 Y-Cable is designed for use with 600W, 1kW, or 2kW fishfinder transducers which had been designed to be directly mated (i.e. no adapter cable) to the transducer socket of any of the following fishfinding products:
- CP370 fishfinder sounder module
- CP300 fishfinder sounder module
- DSM300 fishfinder sounder module
- DSM30 fishfinder sounder module
- DSM250 fishfinder sounder module
- L1250 fishfinder
- L760 fishfinder
- L755 fishfinder
To view the compatible transducers, click here ... note the product ID listed for each transducer.

The transducer name (ex. B319 B260, B744V, P66, P79, etc.) identifies a family of transducers rather than a single transducer, each of which is designed for a specific manufacturer and fishfinder or instrument product offered by that manufacturer. As such, the transducer's product ID(s) should be used in determining compatibility of the transducer with Raymarine's fishfinding products. Please click here to view a FAQ addressing this subject. Accordingly, it would be necessary to know your P79 transducer's product ID in order to specify which Y-cable may be required.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom and Transducer Y Cables - Chuck - Raymarine - Moderator - 05-21-19 11:41 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)