Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Navionics Chart Data will not load and MFD reboots
05-21-19, 07:01 PM (This post was last modified: 05-22-19 08:03 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Navionics Chart Data will not load and MFD reboots
Chuck, Is there a trick to the power on reset? I followed the instructions exactly as directed with no success. Within 60 seconds of power on I could not get either of the 12” Axioms (5 swipes of the power button to the left) or the 9” Pro (holding the back and active button simultaneously) to bring up the screen to start the reset. I even started a stopwatch to ensure I was accomplishing it in the allotted time. I first attempted with only the master powered and then attempted with all 3 on And tried to power on reset the last one powered with no luck.

Any help would be appreciated. .
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Navionics Chart Data will not load and MFD reboots - Robinsonh2o - 05-21-19 07:01 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)